We strongly believe that quality control and assurance department is the backbone of every progressive concern. Our finaly built laboratory houses chemical, mechanical and welding labs equipped with Strength testing machines. Standard procedures are followed to check and test the raw materials for their suitability before sending to production department.

We supply various fiberglass mesh include:

. AWS E6013 Mild Steel Electrodes
. AWS E6016 Mild Steel Electrodes
. AWS E308L-16 Super low Carbon Chrome19 Nickel10 Stainless Steel Electrode
. Chrome 19 Nickel 10 Stainless Steel Electrode
. CO2 gas shielded welding wire

AWS E6013 Mild Steel Electrodes
Description: is of low mild steel type electrodes with titanium coating and suitable for both AC and DC. It can weld in all position. Manipulate is free and restrike is easy.
Application: Used to weld low carbon steel structures, especially suitable for welding thin flat, intermittent shorter welds, as well as some smooth appearance cover.

Chemical Composition of Melting Mental（%）

C	Mn	Si	S	P
≤0.12	0.3～0.6	≤0.35	≤0.035	≤0.040

Reference Current

Diameter（mm）		2.0	2.5	3.2	4.0	5.0
Current range(A)	Flat（A）	40～60	60～90	90～130	140～190	190～240
	Vertical&Overhead （A）	30～55	50～80	80～120	120～170	150～200

AWS E6016 Mild Steel Electrodes
Description: E6016 is of carbon steel electrodes with low hydrogen potassium type coating .The weld mental has superior mechanical properties and high crack resistant properties It can be welded on both AC and DC. Welding can be done in all position. When used AC, the stability is inferior a little to that used DC.
Application: Used to weld the important low carbon steel structure and low alloy steel structure, such as 09Mn2 etc.

Chemical Composition of Melting Mental（%）

C	Mn	Si	S	P
≤0.10	≤1.25	≤0.90	≤0.035	≤0.040

Reference Current

Diameter(mm)	2.5	3.2	4.0	5.0
Current	60～90	90～130	150～190	180～230

Note:
Before welding, it is necessary to clean the work piece and remove the impurities such as oil ,grease rust and moisture, bake the electrode at the temperature of about 300 degree centigrade for one hour. The welding must be carried out under short arc and is suitable for narrow path.

AWS E308L-16 Super low Carbon Chrome19 Nickel10 Stainless Steel Electrode
Description:E308L-16 is a super low carbon stainless steel electrode with titanium calcium type coating. As the carbon rate in the weld mental is no more than 0.04%, it has good inter-crystalline corrosion resistant properties. It is used on both AC and DC and the manipulate is free.
Application:Used to weld super low carbon chrome 19 nickel 11titanium stainless steel structure. It also can weld 0chrome 19nickel 11 titanium stainless steel structure which is anticorrosion and work under 300 degree centigrade. The electrode mainly used in the equipment manufacture of synthetic fibre,fertilizer and petroleum etc.

Chemical Composition of Melting Mental（%）

C	Mn	Si	Cr	Ni	Mo	Cu	S	P
≤0.08	0.5～2.5	≤0.90	18.0～21.0	9.0～11.0	≤0.75	≤0.75	≤0.030	≤0.040

Reference Current

Diameter(mm)	2.5	3.2	4.0	5.0
Current	50～70	80～110	130～160	160～200

Note:
Before welding, the electrode must be baked at about 150 degree centigrade for one hour . It should be used on DC possibly, not too large current otherwise the electrode become red easily. The melting depth is lower when used AC.

Chrome 19 Nickel 10 Stainless Steel Electrode
Description:E308-15 is a low carbon chrome19nickel10 stainless steel electrode with low hydrogen type coating. The deposited mental has good mechanical properties and inter-crystalline corrosion resistant properties. It should be connected with negative polarity on DC and can be welded in all position.
Application:Used to weld the 0chrome 19nickel9 stainless steel structure which is anticorrosive and work under 300 degree centigrade, as well as some bad welding steel structure such as high chrome steel, and the surface of the pile welding stainless steel structure.

Chemical Composition of Melting Mental（%）

C	Mn	Si	Cr	Ni	Mo	Cu	S	P
≤0.08	0.5～2.5	≤0.90	18.0～21.0	9.0～11.0	≤0.75	≤0.75	≤0.030	≤0.040

Reference Current

Diameter(mm)	2.5	3.2	4.0	5.0
Current	50～80	80～110	110～160	160～200

Note:
Before welding ,the electrode must be baked at about 250 degree centigrade for one hour.

CO2 gas shielded welding wire
Description:The product is a CO2 gas shielded welding wire, which is made of excellent steel by drawing, straightening and copper coating. It has various characteristics such as open arc, slag-free, good weld ability, high efficiency, beautiful bead, littler spatter. It can’t be welded in all positions . The product has high precision size. It is winded in Spool, so that it can be welded automatically or semi-automatically.
Application:Used for welding low carbon steel and low alloy steel structures, especially for welding of thin plates.